IEC 60227-1 Cable Testing Equipment Bending Test Apparatus With 60
Per Minute Flexing Rate
IEC60227-2 clause 3.2 Bending test:
The requirements are given in 220.127.116.11 of IEC 60227-1.
A sample of cord of appropriate length shall be fixed in the
apparatus as shown in figure 2, and loaded with a weight having a
mass of 0,5 kg. A current of about 0,1 A shall be passed through
The sample shall be bent backwards and forwards in a direction
perpendicular to the plane of the axes of the conductors, the two
extreme positions making an angle of 90° on both sides of the
A flexing is a movement through 180°. The rate of flexing is 60 per
If the sample does not comply with the test, this shall be repeated
with two additional samples, both of which shall then comply with
the repeated test.
The cord bending tester is designed and manufactured according to
IEC 60227-1 clause 18.104.22.168, IEC 60227-2 clause 3.2. It is used to
checking the power cord flexing(bending) resistance performance.
Test object of rated voltages up to and including 450/750V
polyvinyl chloride insulated cables.
The test device is easy to operate, can preset the number of test
times (up to 999999 times), the test speed and test angle can be
adjusted, load current 0-1A stepless adjustable, and with the
current conduction detection function. Tester will stop
automatically when preset test times completed or detected
conduction interrupt, record the tested times and alarm with sound.
The equipment is manufactured according to the standard and the
sample fixture matches the multiple samples. The utility model has
the advantages of beautiful appearance, strong function and high
reliability, and is an indispensable equipment for cable
manufacturers and laboratory testing.
|Input Power||230V, 50Hz|
|Work station||1 station|
|Flexing angle||Each side 45°, 60°, 90°, has a dial for corresponding reference.
|Flexing speed rate||10~60times per min, manual adjust|
|Test times||0~999999 times, can be preset and displayed|
|Specimen fixture||Specific fixtures|
|Conduction detection||The test device is equipped with power supply terminals for the
test samples, and it has a conduction detection function, if there
is no current go through the test sample, the indicator light turns
on, alarm occurs and the test stops, records the real-time test
IEC 60227-2 Figure 2: